Connecting The Power Supply - IBM NetVista Hardware Maintenance Manual
Hardware maintenance manual (hmm) for netvista 2259 and 6049 systems.
Hide thumbs
Also See for NetVista:
- Hardware maintenance manual (211 pages) ,
- Hardware manual (135 pages) ,
- Guide utilisateur (124 pages)
Table of Contents
Advertisement
IBM NetVista Type 6049 and 2259 Refresh 1.1
Connecting the Power Supply
Version: HMM02
1
.After you have installed the
mainboard into the case, you should
connect the power cable from the case
power supply unit to the mainboard
power connector. Since the floppy drive
is situated closely to the power supply.
For convenience purpose, loosen the
screw that holds the Floppy drive.
2
.Push the storage bay sideways as
shown in the figure.
3
. Locate the mainboard power
connector. See figure for reference.
13 of 35
Advertisement
Table of Contents
