IBM NetVista Hardware Maintenance Manual page 16

IBM NetVista Type 6049 and 2259 Refresh 1.1
Installing the CD-ROM, Floppy
and Hard Drives
Version: HMM02
1
. There are two different size "bays"
into which each of the various drives will
fit. Take a close look at the drive and
determine which is the "bay" for the
floppy drive. Install the floppy drive into
the upper side of the storage bay. See
figure for reference.
2
S
. lide the drive in the appropriate
location. For a 3.5" drive, secure the two
screws located on the both side of the
storage bay.
You can easily see where the screw holes
in the drive line up.
16 of 35