IBM NetVista Type 6049 and 2259 Refresh 1.1
Installing the Expansion Card
Version: HMM02
1
.The most commonly used expansion
card is the AGP and modem card. Let's
start by installing the AGP card first.
Remove the dust cover from the slot in
the system case that corresponds t o the
expansion slot that you going to use.
2
.Following the figure, push the edge
connector of the AGP card into the
expansion slot.
3
.Using both hands, gently press down
the AGP card firmly to ensure that the
edge connector is correctly rested in the
slot.
30 of 35