IBM NetVista Type 6049 and 2259 Refresh 1.1
Version: HMM02
4
. The power connector should fit
perfectly in the slot on the ma inboard.
Note the orientation of the cables before
trying to connect them. Each function of
the cable is already defined.
5
. Connect the +12V power connector.
Make sure the power connectors are
properly seated and firmly attached.
6
.Push back the storage bay to its
original position. There are two things
that need to be aware of: One is to make
sure that the screw holes of the mounting
box are aligned with that of the drive and
the brackets are smoothly attached to the
hook.
14 of 35