Explanation of
When the IGMP static entry is created on switch 1, entries immediately appear in the IGMP
snooping table and the IGMP table.
Manager Switch 1> show igmpsnooping
IGMP Snooping
------------------------------------------------------------------------
Status ........................... Enabled
Disabled All-groups ports ........ None
Vlan Name (vlan id) ..... default (1)
Fast Leave .............. Off
Group List ..............
Vlan Name (vlan id) ..... vlan100 (100)
Fast Leave .............. Off
Group List ..............
------------------------------------------------------------------------
Manager Switch 1> show ip igmp
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 260 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
Disabled All-groups ports ........ None
Interface Name .......... vlan100
Group List ..............
------------------------------------------------------------------------
Page 51 | AlliedWare™ OS How To Note: IGMP
Static IGMP
No group memberships.
Group. 224.12.13.14
Ports
5
Group. 224.12.13.14
Ports
5
Static Ports
5
Entry timeout Infinity
Static association
Static IGMP > Explanation of Static IGMP
(DR)
Refresh time Infinity