Statically Specifying That A Port Is A Router Port - Allied Telesis AR400 Series How To Configure

3. Statically add port 6 as a router port attached to VLAN 1.
Manager Rapier 48i> add igmpsnooping vlan=1 routerport=6
snooped group 224.0.0.2 added
Adding port 6 for group 224.0.0.2 on default
Info (1005003): Operation successful.
Manager Rapier 48i> show igmpsnooping
IGMP Snooping
------------------------------------------------------------------------
Status ........................... Enabled
Disabled All-groups ports ........ None
Vlan Name (vlan id) ..... default (1)
Fast Leave .............. Off
Query Solicitation ...... On
Static Router Ports ..... 6
Group List ..............
------------------------------------------------------------------------
The above output shows that port 6 has joined port 50 as an All Groups port. Also note that
the Entry timeout is infinity. This timeout of infinity only applies to the static entry—port 50
will time out as normal if Queries stop arriving on that port.
4. Stop port 6 from being a static router port.
To remove the static configuration, simply delete it.
Manager Rapier 48i> delete igmpsnooping vlan=1 routerport=6
Deleting port 6 from group 224.0.0.2 on default
Reconstructing snooping entries(224.0.0.2/vlan1): 49,
Info (1005003): Operation successful.
Page 102 | AlliedWare™ OS How To Note: IGMP
Group. 239.255.255.250
Ports 7
All Groups
Ports 6,50
Statically specifying that a port is a router port > Example
Entry timeout 184 secs
Entry timeout Infinity