Remote Setup (For Mfc Models); Remote Setup - Brother DCP-8110DN Software User's Manual

11

Remote Setup (For MFC models)

Remote Setup

The Remote Setup application lets you configure many machine and network settings from a Macintosh
application. When you access this application, the settings on your machine will be downloaded automatically
to your Macintosh and displayed on your Macintosh screen. If you change the settings, you can upload them
directly to the machine.
Note
• The RemoteSetup application icon is in Macintosh HD/Library/Printers/Brother/Utilities.
• No password is required by default. You can use BRAdmin Light or Web Based Management to change
this password. (See uu Network User's Guide.)
• If your machine is connected via a Network, enter a password if you have set one.
OK

Lets you start uploading data to the machine and exit the Remote Setup application. If an error message
is displayed, enter the correct data again and then click OK.
Cancel

Lets you exit the Remote Setup application without uploading data to the machine.
 Apply
Lets you upload data to the machine without exiting the Remote Setup application.
11
11
11
202