Brother DCP-8110DN Software User's Manual page 243

Network Scanning
k
Press d or c to display File Size. Press File Size and then press the setting you want.
Press Start to start scanning. Go to step l.
Note
If you want to add destinations, press Number of Destinations. You can add a total of 50
destinations.
l
The machine starts the scanning process.
If you are using the scanner glass, the LCD displays Next Page?. Press Yes or No.
Using a One Touch (For MFC-8950DW(T)) or Speed Dial numbers
You can also scan a document directly to an address you registered in a One Touch or Speed Dial number.
When you scan the document, the settings you registered with the One Touch or Speed Dial will be used for
the quality and the file type. Only One Touch or Speed Dials with an E-mail address registered can be used
when you scan data using One Touch or Speed Dial. (For MFC-8950DW(T), I-Fax addresses are not
available for use.)
a
Press .
b
Choose a One Touch or Speed Dial number on the touchscreen.
c
Press Send a E-mail.
d
Load your document.
If you want to change the duplex setting, press Duplex Scan and then press the setting you want.
e
Press Start. The machine starts the scanning process.
Note
You can store the scan resolution (Scan Profile) for each stored E-mail address in a One Touch or Speed
Dial number. (For more information on how to use One Touch and Speed Dial: uu Basic User's Guide.)
13
13
235