Firewall Settings (For Network Users); Before Using The Brother Software; Windows ® Xp Sp2 Or Greater - Brother DCP-8110DN Software User's Manual

7

Firewall settings (For Network users)

Before using the Brother software

Firewall settings on your PC may reject the necessary network connection for network printing, network
scanning and PC Fax. If you are using the Windows
installer CD-ROM, the necessary Firewall settings have already been made. If you did not install from the
installer CD-ROM follow the instructions below to configure your Windows
other personal Firewall software, see the User's Guide for your software or contact the software
manufacturer.
UDP Port number information for Firewall configuration
UDP Port Network Scanning
External
Port number
Internal
Port number
1
Add Port number 137 if you still have trouble with your network connection after you added port 54925 and 54926. Port number 137 also supports
printing over the network.
®
Windows XP SP2 or greater
a
Click the Start button, Control Panel, Network and Internet Connections and then
Windows Firewall.
Make sure that Windows Firewall on the General tab is set to On (recommended).
b
Click the Advanced tab and Settings... button of Network Connection Settings.
c
Click Add.
®
Network PC-Fax
54925 54926
54925 54926
Firewall and you installed MFL-Pro Suite from the
®
Firewall. If you are using any
Network Printing, Network Scanning,
Network PC-Fax and Remote Setup
161
161
7
7
1
137
7
137
7
125