Saving The Scanned Image; How To Change The Default Settings Of Each Button - Brother DCP-8110DN Software User's Manual

ControlCenter4

Saving the scanned image

The (File) button lets you scan an image to a folder on your hard disk in one of the file types shown in
the file attachment list.
a
Select the Scan tab.
b
If you want to change the scan settings, right-click
to preview and configure the scanned image, check PreScan. Click OK.
c
Click (File).
d
The image will be saved in the folder you have chosen.

How to change the default settings of each button

You can change the default settings of the
a
Right-click the button that you want to configure and click Button settings. The settings dialog will
appear.
b
Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness,
Contrast, Manual multi-page scan and Duplex(two-sided) Scanning (For DCP-8155DN,
MFC-8910DW and MFC-8950DW(T)) as needed.
c
Click OK. The new settings will be used as the default settings.
Note
To preview and configure the scanned image, check PreScan in the settings dialog.
(File) and then change your settings. If you want
(Image), (OCR), (E-mail) and (File) buttons.
4
4
4
92