Scan To Ftp - Brother DCP-8110DN Software User's Manual

Network Scanning

Scan to FTP

When you choose Scan to FTP, you can scan a black and white or color document directly to an FTP server
on your local network, or on the internet.
The details required to use Scan to FTP can be entered by using Web Based Management to pre-configure
and store the details in an FTP Profile.
Note
• Scan to FTP is available when FTP profiles are configured by using Web Based Management.
• We recommend Windows
Macintosh. Please also make sure that JavaScript and Cookies are always enabled in whichever browser
you use. If a different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type "http://xxx.xxx.xxx.xxx" (where xxx.xxx.xxx.xxx is the IP address of
your machine) into your browser, and then you can configure or change the settings in Scan to FTP/Network
under the Scan tab. You can configure up to ten FTP server profiles and you can choose what profile
numbers (1 to 10) to use for Scan to FTP settings in Scan to FTP/Network Profile.
Note
If you want to find the IP address of your machine: uu Network User's Guide: Printing the Network
Configuration Report.
In addition to seven preset file names you can store two user defined file names that can be used for creating
an FTP Server Profile.
® ®
Internet Explorer 7.0/8.0 or Firefox
® ®
3.6 for Windows and Safari 4.0/5.0 for
13
13
242