Test Mode (Language/Machine Specifications Settings) - Brother BL6200 Service Manual

<

TEST MODE (Language/Machine Specifications Settings)

This Test Mode is used to switch the language in which LCD displays appear, and to switch the machine
specifications.
Setting the Test Mode
1. Turn off the power supply.
2. Lower the BH lever.
3. Turn on the power supply while holding down both the ↑ and A
keys on the display panel to enter the Test Mode. The LCD
display will appear as shown in Figure 1.
Setting the Language
1. Press either the A key (forward sequence) or the B key (reverse sequence) until the desired language is
displayed on the LCD.
Setting the Machine Specifications
The teaching contents displayed on the LCD are determined by three possible combinations: 1 ) whether or
not there is a zigzag manual dial; 2) whether or not there is a Drop Feed function; and 3) the construction and
operation of the bobbin case (CB hook or Top bobbin).
1. Press the ↓ key (forward sequence) or the ↑ key (reverse sequence) to set the desired specifications.
When all of the settings have been completed, turn off the power supply to cancel the Test Mode.
1) ENGLISH
2) DEUTSCH
3) FRANCAIS
4) ITALIANO
5) NEDERLANDS
6) ESPANOL
7) DANSK
8) NORSK
Zigzag Dial
NO
NO
YES
YES
NO
NO
YES
YES
(GERMAN)
(FRENCH)
(ITALIAN)
(DUTCH)
(SPANISH)
(DANISH)
(NORWEGIAN)
<
Table of Language Specifications
Drop Feed Lever
NO
YES
NO
YES
NO
YES
NO
YES
<
Table of Machine Specifications
9) SUOMEKSI
10) SVENSK
11) CESTINA
12) SLOWAKIAN
13) MAGYAR
14) SLOVENSKO
15) PORTUGUES
16)
>
Bobbin Operation
CB hook
CB hook
CB hook
CB hook
Top bobbin
Top bobbin
Top bobbin
Top bobbin
>
- 65 -
>
(FINNISH)
(SWEDISH)
(CZECH)
(SLOVAK)
(HUNGARIAN)
(SLOVENE)
(PORT.)
(JAPANESE)
Display
1) Z-X : D-X : V
2) Z-X : D-O : V
3) Z-O : D-X : V
4) Z-O : D-O : V
5) Z-X : D-X : H
6) Z-X : D-O : H
7) Z-O : D-X : H
8) Z-O : D-O : H