Administrator Password Change - Kyocera FS-C5350DN Advanced Operation Manual

>Change Password
****************
>Change Password
_
OK?
010
Using the Operation Panel
Change Password (Administrator Password change)
You can use this to change the administrator password.
1
In step 3 in Password (Administrator Password input) above, press
or while the Admin (Change) screen is displayed until >Change
Password appears.
IMPORTANT The administrator password is not displayed.
2
Press [OK]. A blinking cursor (_) appears.
3
Press or to increase or decrease, respectively, the value at the
blinking cursor. Enter the password to be changed. Use
move the cursor right and left. Enter a password consisting of
between 0 and 16 numbers.
4
Press [OK]. A confirmation screen appears. (E.g.: Where the
administrator password is changed to 010)
5
Press [OK]. The new administrator password is confirmed.
6
Press [MENU]. The display returns to Ready.
and to
2-83