General Description Of Options - Kyocera FS-C5350DN Advanced Operation Manual

Memory
Card Slot
Options

General Description of Options

Memory Card
The printer is equipped with a slot for a memory card with the maximum
size of 4 GB. A memory card is useful for storing fonts, macros, and
overlays.
Reading the Memory Card
Once inserted in the printer's slot, the contents of the memory card can
be read from the operation panel or automatically when you power on or
reset the printer. To manually read data in the memory card, refer to
Memory Card (Using the memory card) on page 2-58.
Formatting the Memory Card
To use an unused memory card, you must first use the printer to format
the memory card.
1
Switch off the printer, remove the electrical cord and then remove the
main controller unit. To read how to remove the main controller unit,
refer to the section on inserting the memory module.
2
Insert the memory card into the memory card slot.
PF-500, PF-510 Paper Feeder
The optional paper feeder PF-500 (for plain paper) and PF-510 (for
multiuse media) will each hold approximately 500 sheets of paper. Up to
3 optional feeders can be added to the bottom of the printer, allowing
continuous feeding of up to 2,000 sheets of paper when combined with
the printer's own cassette.
IMPORTANT When you use the paper feeder, place the papers and
envelopes print-side up.
The papers that can be used in the cassettes supplied with the paper
feeders are as follows:
PF-500 :
Paper size : Envelope Monarch, Envelope #10, Envelope #9, Envelope
#6, Envelope DL, Envelope C5, A5, B5, ISO B5, A4,
Executive, Letter, Legal, OufukuHagaki, Oficio II,
Statement, Folio, Youkei 2, Youkei 4, 16K and Other (92 x
165 mm to 216 x 356 mm)
Paper type : Plain, preprinted, bond, recycled, rough, letterhead, color,
prepunched, high quality, custom 1 (to 8)
PF-510 :
Paper size : Envelope Monarch, Envelope #10, Envelope #9, Envelope
#6, Envelope DL, Envelope C5, A5, B5, ISO B5, A4,
Executive, Letter, Legal, OufukuHagaki, Oficio II,
3-5