Password Protect Administrator Settings; Snmp - Kyocera FS-C8650DN Driver Manual

Device Settings

Password Protect Administrator Settings

Setting the Administrator Password
1
2
Clearing the Administrator Password
1
2
3

SNMP

2-5
A profile must be created in the Profiles dialog box, accessed from any
Printing Preferences tab.
An association must be created between a profile and an application in the
Application Based Printing dialog box, accessed from the Profiles dialog
box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Associate Profile with application.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. If
selected, this setting prompts you to enter a password and confirm the
password. This password protection blocks access to all Administrator
Settings options.
You can set a password to prevent unauthorized changes in the Administrator
Settings dialog box.
In Device Settings > Administrator > General, select Password protect
administrator settings.
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
You can remove the administrator password.
In Device Settings, click Administrator.
In the Enter Password text box, type the password and click OK.
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box and click OK.
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. These settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system's Command Center
RX.
The following options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
This option ensures secure Auto Configure communication using a user
name and password. Authentication and privacy options are available by
selecting Settings.
Apply to other models
User Guide