Kyocera FS-C5350DN Advanced Operation Manual page 100

>Select Account>
?00000000
>>Counter
>>Color Counter
2-76
Select Account (Department-specific settings)
This specifies the functions used for managing individual account IDs.
The options available in Select Account are as follows:
• Counter (Account-specific counter management [color + monochrome
total])
• Color Counter (Account-specific counter management [color])
• Restriction (Print restriction selection [color + monochrome total])
• Color Restrict (Print restriction selection [color])
• Maximum Output (Maximum print output setting [color + monochrome
total])
• Color Max.out (Maximum print output setting [color])
• Reset Counter (Counter reset)
1
Press
2
Press
3
Press [OK]. A blinking question mark (?) appears.
4
Each time you press
sequence appears.
5
Display the desired account ID and press [OK]. Press
changes to the individual department setting screen.
Counter (Account-specific counter management [color +
monochrome total])
Displays the total number of pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1
Set the account ID and then press
>>Counter appears. (E.g.: 100)
0000100
The counter shows a number between 0000000 and 9999999.
2
Press [MENU]. The display returns to Ready.
Color Counter (Account-specific counter management [color])
Displays the total number of color pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1
Set the account ID and then press
Counter appears. (E.g.: 50)
0000050
The counter shows a number between 0000000 and 9999999.
2
Press [MENU]. The display returns to Ready.
while Job Accounting > is displayed.
or repeatedly until >Select Account> appears.
or , the next registered account ID in the
, the display
or repeatedly until
or repeatedly until >>Color
Using the Operation Panel