Cancelling Direct Transmission - Kyocera FS-C2126MFP Operation Manual

Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than
waiting for the specified time, use the procedure below.
Scheduled Job:
0011
0017
0018
*********************
[ Cancel ]

Cancelling Direct Transmission

During direct transmission, to cancel communication during transmission, press the Stop key on the operation
panel. The originals that have been scanned are ejected, and the screen returns to the default screen for
sending. When originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the
following procedure.
a b
b Broadcast
b 0324256345
b 0756545865
[ Menu ]
1
Press the Status/Job Cancel key.
2
Press the or
3
Press the OK key.
4
Press the or key to select the job you want to
cancel. Or, select the job you want to send
immediately.
5
Press [Menu] (the Right Select key).
6
Press the or
select [Start Now] to send the job immediately.
7
Press the OK key.
8
Press [Yes] (the Left Select key). Communication
is canceled. Or, communication starts if sending
the job immediately.
1
Press the Status/Job Cancel key.
2
Press the or
3
Press the OK key.
3-13
FAX Operation (Basic)
key to select [Scheduled Job].
key to select [Cancel Job]. Or,
key to select [FAX].
3