Xerox 6015/NI User Manual page 63

3. Click the plus button (+) under the list of printers.
4. Click the Default icon at the top of the window.
Select your printer from the list and click Add.
5.
Note: If your printer was not detected, verify that the printer is on and that the Ethernet or USB cable
is connected properly.
To add the printer by specifying the IP address:
1. From the computer Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus button (+) under the list of printers.
Click IP.
4.
5. From the Protocol drop-down menu, select the protocol.
6. In the Address field, enter the IP address of the printer.
7. In the Name field, enter a name for the printer.
8. From the Print Using drop-down list, choose Select a driver to use.
9. Select the print driver for your printer model from the list.
10. Click Add.
Now you can print and scan. For details, see
See also:
Online Support Assistant at:
Utilities
The Address Book Editor and Express Scan Manager are installed automatically when you install the scan
driver. For details, see Installing the Drivers and Utilities for Macintosh OS X Version 10.5 and Later
page 62.
Printing on page 71 and
www.xerox.com/office/WC6015support
WorkCentre 6015 Color Multifunction Printer
Installation and Setup
Scanning on page 105.
User Guide
on
63