Xerox 6015/NI User Manual page 185

Symptom
Vertical blanks.
Slanted printing.
Cause
The printer is worn or damaged.
The toner cartridges are not Xerox
toner cartridges.
The altitude setting is incorrect.
Condensation inside the printer
causes partial blanks or creased
paper.
The lenses are being blocked.
The printer is worn or damaged.
The toner cartridges are not Xerox
toner cartridges.
The paper guides in the trays are
not set correctly.
Solution
For assistance, go to the Xerox
website at
www.xerox.com/office/WC6015support.
®
Verify that the toner cartridges meet
specifications and replace if necessary.
For details, see Consumables
160.
Adjust the altitude setting of the printer.
For details, see Adjusting the Altitude
page 159.
Turn on the printer and leave it on for at
least one hour to get rid of the
condensation. For assistance, go to the
®
Xerox Support website at
www.xerox.com/office/WC6015support.
Clean the lenses in the inside of the
printer. For details, see
Lenses on page 152.
For assistance, go to the Xerox
website at
www.xerox.com/office/WC6015support.
®
Verify that the toner cartridges meet
specifications and replace if necessary.
Reset the paper tray guides. For details,
see Loading Paper
WorkCentre 6015 Color Multifunction Printer
Troubleshooting
®
Support
on page
on
Cleaning the LED
®
Support
on page 75.
185
User Guide