9Default Settings (Dfse); Position Feedback (Feed); Correction Of Faults; Error And Information Messages - Elation Power Wash 575E Instruction Manual

MAGE
YELL
3.10.9 Default Settings
DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to
the default values. On the display will appear
faults are set.
Function
DMX Address
Pan reverse
Tilt reverse
Automatic lamp on
Lamp on via DMX
Display
Cooling fan
Feedback
3.10.10 Position Feedback
FEED
P O W E R W A S H 5 7 5 E
The P O W E R W A S H 5 7 5 E
correction (feedback) for the Pan and Tilt movement. Use the Up/Down-
keys to select
don't want this function. Press Enter to confirm or Mode to cancel and
return to the menu.
3.10.11

Correction of faults

EFLG
(Function available for authorized persons only)

3.11 Error and Information Messages

This message appears if you try to switch on the lamp within 5
HEAt
minutes after having switched off (lamp too hot). The message will
appear on the display if the lamp doesn't ignite within 20 seconds.
Elation Lighting
The fixture will store this command and automatically ignite the lamp
after 5 minutes.
Coarse adjustment of the Magenta color wheel
- 99 - + 99
Coarse adjustment of the Yellow color wheel
- 99 - + 99
(DFSE)
Display
D001
RPAN
RTLT
LAAU
DLOF
DISP
FANS
FEED
(FEED)
ON
if you want to enable the feedback function or
(EFLG)
www.elationlighting.com
ok
to indicate that the de-
Default Settings
ON
ON
ON
ON
¸
D ON
¸
HIGH REG
ON
¸
is provided with a automatic position
D001
OFF
¸
OFF
¸
OFF
¸
OFF
LOOF LOHI
¸
OFF
Off
if you
20