Change The Lamp; Safety Regulations; Realize The Lamp Change - Elation Power Wash 575E Instruction Manual

Channel Function
lying eight
random movement
15) Speed Pan/Tilt relative movement
Pan/Tilt
Pan/Tilt slow – fast
Use this channel 14) also for the
speed of the movements (channel
13).
Lampe ON Shutter open
Lampe OFF Channel 9 ( min. 3 sec. ) (only if
shutter is closed, channel 9 = 0 ..15)
FCOL
*) Set the function "

5 Change the Lamp

For a frictionless operation pleas read this chapter carefully and follow all instructions.

5.1 Safety Regulations

• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don't touch the bulb of the lamp with bare fingers (this can cause damages).
• Before you put the POWER WASH 575E
otherwise your retina can be hurt!

5.2 Realize the Lamp Change

1. Pull out the main plug!
2. The lamp can be changed in a very comfortable way directly from the
backside of the case without opening the head.
3. Open the four recessed head screws (1, 2, 3 and 4) of the backside lamp
sheet and remove it carefully.
4. Remove the old or broken lamp by opening the two sidewise lamp screws.
Attention: The glass bulb of the lamp can splinter. For that reason remove
the lamp with safety gloves or some cloth.
5. Put in the new lamp securely with a tight fit into the socket and close the two
Elation Lighting
size / phase see also PAN
size see also PAN
ON
" ' ' if you want to control the color wheel continuously.
POWER WASH 575E
www.elationlighting.com
Time and Value
Pan Min. 530° = 200 s
Pan Max. 530° = 2.65
s
Tilt Min. 285° = 110 s
Tilt Max. 285° = 1.8 s
into operation close the casing,
DMX HEX
192..22 C0..DF 76..87
3
224..25 E0..FF 88..100
5
0..01 00..01
02..255 02..FF 2..100
254..25 FE..FF 99..100
5
230..24 E6..F9 92..97
9
24
%
0..1