Table of Contents
Advertisement
T O R Q U E S C R E W S E T T I N G S
IN ORDER TO MAINTAIN THE IP65 RATING ON THE LIGHTING FIXTURES, ALL SCREWS
MUST BE TIGHTENED TO THE FOLLOWING TORQUE SPECIFICATION USING A TORQUE
DRIVER.
Zone Number
TORQUE DRIVERS (Recommended):
UTICA TS-30 (shown)
ALTERNATE DRIVERS:
• Proto J6107A
• Wiha 28887
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE
ISSUES! TO CONFIRM THE IP65 INTEGRITY AFTER A LAMP REPLACEMENT,
TEST THE FIXTURE USING THE ELATION IP TESTER. CONTACT ELATION
SERVICE FOR MORE DETAILS.
Description
1
Lens Cover
2
Upper Cover
3
Back Cover
Quantity
Torque Spec
4
10.4 lb-in (12 kg-cm)
4
11.3 lb-in (13 kg-cm)
4
11.3 lb-in (13 kg-cm)
21
1
2
3
Advertisement
Table of Contents
