5Display; 6Fixture Temperature; 7Fan Control (Fans) - Elation Power Wash 575E Instruction Manual

3.10.5 Display
DISP
Use this function to choose between different display indications. Use the
Up/Down-keys to select desired function and press Enter to confirm or
Mode to cancel and return to the menu.
D ON
REV
3.10.6 Fixture Temperature
TEMP
This function allows you to read out the actual temperature of the
POWER WASH 575E
POWER WASH 575E
temperatures below 80°C are not critical. 80°C and more lead the lamp
being switched off at a critical point. Please note for a save operation that
the outside temperature should not exceed 45°C.
3.10.7 Fan Control
FANS
By using this function you can choose between 4 types of fan speed
operations. Use the Up/Down-keys to select desired function and press
Enter to confirm or Mode to cancel and return to the menu.
HIGH
REG
LOOF
LOHI
Elation Lighting
(DISP)
Display On/Off (If you've chosen
15 seconds after the last input. The next key touch will reactivate
the display).
Turn around the display.
Note: You can also do this by pushing the Up/Down-keys at the
same time.
(TEMP)
. Press Enter to confirm or Mode to cancel. Inside
(FANS)
The cooling fan works continuously at max. speed.
The fan automatically raises its speed in order to control inside
temperature of the fixture.
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the POWER
575E
575E automatically switch off the lamp.
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the POWER
575E
575E automatically switch from low to high fan speed.
www.elationlighting.com
off
, the display will go out within
POWER
POWER
WASH
WASH
WASH
WASH
18