Torque Settings For Screws - Elation KL PAR FC IP User Manual

T O R Q U E S E T T I N G S F O R S C R E W S
IN ORDER TO MAINTAIN THE IP65 RATING ON THE LIGHTING FIXTURES, ALL SCREWS
MUST BE TIGHTENED TO THE FOLLOWING TORQUE SPECIFICATION USING A TORQUE
DRIVER.
Refer to the table and diagram below for torque specifications.
TORQUE DRIVERS (Recommended): UTICA TS-30 (shown)
ALTERNATE DRIVERS:
• Proto J6107A
• Wiha 28887
CAUTION! DO NOT OVER TORQUE SCREWS, AS THIS CAN CAUSE LEAKAGE
ISSUES!
NO. LOCATION
1 Front Cover
2 Back Cover
1
QUANTITY TORQUE
8.7 + 0.4 lb-in
8
(10.0 + 0.5 kg-cm)
8.7 + 0.4 lb-in
6
(10.0 + 0.5 kg-cm)
31
2