Power Wash 575E; Safety Regulations; Circumference And Interval (Rule-Of-Thumb) - Elation Power Wash 575E Instruction Manual

lamp screws. The lamp filler neck must not in the direction lamp or lenses.
Attention: Use only the original lamp type!
6. Pull the lamp holder safely back in the shaft and close the four screws.
7. The running time of the lamp
6
6 Maintenance and Cleaning the POWER W
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-
fluid residues must not built up on or within the fixture. Otherwise the fixture's light-
output will be significantly reduced. Regular cleaning will not only ensure the
maximum light-output, but will also allow the fixture to function reliable throughout its
life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please
contact your local dealer.

6.1 Safety Regulations

• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Before you put the POWER WASH 575E
otherwise your retina can be hurt!

6.2 Circumference and Interval (rule-of-thumb)

The contamination of the fixture depends on the environment details. Therefore
no general guidelines can be given. From this it follows that the intervals are only
suggestions from our practice experience.
Position
Outside optic
Color filter
Beam shape
Dimmer/Shutter
Fan and air channel
Reflector
Lamp
Elation Lighting
LA1
can be reseed in the
POWER W

POWER WASH 575E

Interval
weekly
monthly
monthly
yearly
monthly
never
never
www.elationlighting.com
Time
ASH 575E
ASH 575E
into operation close the casing,
In this way
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
vacuum cleaner, airbrush, etc.
vacuum cleaner, airbrush, etc.
Menu.
25