Secure The Power Wash 575E; Power Wash 575E - Elation Power Wash 575E Instruction Manual

a) Camlock system: This system allows you a fast and efficient setup of
clamps. Attach the two camlocks to designated position on the
backside of the case and close the locks by turning them 90°. Verify
the secure fit of the camlock system. The clamps themselves are
directly attached permanently on the camlocks.
b) Use two clamps direct on the backside of the POWER
to mount the unit on a truss (each two opposite threads max. M10x20).

2.2 Secure the POWER WASH 575E

Regardless of the rigging of the POWER
stipulated safety wire. Therefore you have to thread to safety wire through to two
provided holes on the backside of the fixture and connect it with the truss-
support. Pay attention to a safe and proper fastening.
Elation Lighting
4x Camlock

POWER WASH 575E

www.elationlighting.com
4x M10x20mm
POWER WASH
WASH
90°
POWER WASH
WASH
575E
575E you have to use a
575E
575E
10