Deactivation Procedure
The following is the step by step procedure to deactivate License Activate Base Functions.
1. Gather information form MFP/ Kit
1-1. Find [Token Number] from License Kit.
1-2. Find [Serial Number] from MFP.
2. Get Deactivation code
2-1. Access to LMS and get [Deactivation Code] and [Function Code]
3. MFP Deactivation
3-1. Input [Deactivation Code] and [Function Code] to MFP and deactivate functions.
3-2. Input [Deactivation Complete Code] to LMS.
When using each code, please pay attention "U" and "V", "0(number)" and "O(alphabet)".
"0 (Number)" is not used in [Deactivation Code] and [Deactivation Complete Code].
Here are necessary information (operation) and acquisition procedure in the above steps.
Information (operation)
Token Number
Serial Number
Deactivation Code
Function Code
Deactivation
Deactivation Complete
Code
Issued by BT-CSO
Acquisition Procedure
Token Certificate (License Kit)
Serial Number Label
LMS (Web browser)
LMS (Web browser)
Input to MFP panel
(Service Mode)
MFP panel (Service Mode)
40
for Customer Engineer
Note
20 digits alphanumeric
Check License Kit that needs
Deactivation.
13 digits alphanumeric
Input to LMS
35 digits alphanumeric
Input to MFP panel
35 digits alphanumeric
Input to LMS
Ver 1.01