Activation Procedure
The following is the step by step procedure to activate License Activation Base Functions.
1. Gather information from MFP/ Kit
1-1. Find [Token Number] from License Kit.
1-2. Get [Request Code] and [Serial Number] from MFP.
2. Access to LMS
2-1. Access to LMS and get [License Code] and [Function Code].
3. MFP Activation
3-1. Input [License Code] and [Function Code], and activate the function.
When using each code, please pay attention "U" and "V", "0(number)" and "O(alphabet)".
"0 (Number)" is not used in [Request Code] and [License Code].
Here are necessary information (operation) and acquisition procedure in the above steps.
Information (operation)
Token Number
Request Code
Serial Number
License Code
Function Code
Activation
(Input License Code)
*If it is possible to access MFP and LMS from the PC, you can perform the procedure (from
getting Token Number to performing activation) from "License Install Utility".
(About the detailed procedure, please refer to "License Install Utility" of Users Guide.)
Issued by BT-CSO
Acquisition Procedure
Token Certificate (License Kit)
a) MFP panel
-
Administrator Mode
-
Service Mode
b) PSWC (Administrator Mode)
Get Serial number when taking
Request Code.
Serial Number Label
LMS (Web browser)
LMS (Web browser)
a) MFP panel
-
Administrator Mode
-
Service Mode
b) PSWC (Administrator Mode)
13
for Customer Engineer
Note
20 digits alphanumeric
30 digits alphanumeric
13 digits alphanumeric
EG.) A00H020012345
30 digits alphanumeric
Ver 1.01