List/Counter] - Konica Minolta bizhub C220 User Manual

7.1 [System Settings]
5
Select an item to be corrected.
6
Select paper used to output a test pattern.
% As a paper size, select 11 e 17 w, 8-1/2 e 11 v, A3 w, or A4 v. By default, 11 e 17 w (A3 w) is
selected.
% Paper in the Bypass Tray cannot be selected.
7
Press the Start key.
A test pattern is printed.
% Selecting 11 e 17 w or A3 w outputs one sheet, and selecting 8-1/2 e 11 v or A4 v outputs two
sheets.
8
Place the printed test pattern on the Touch Panel in the orientation displayed in the Original Glass.
% For the test patterns of 8-1/2 e 11 v or A4 v, place two output sheets side by side.
9
Place 10 or more sheets of blank paper on top of the test pattern to prevent it from becoming transpar-
ent.
10
Close the ADF or Original Cover.
11
Press the Start key.
The test pattern is scanned.
The gradation level is automatically adjusted.
12
Repeat steps 5 through 11 two more times.
7.1.8

[List/Counter]

Configure the job settings list print settings and paper count settings for this machine.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [List/Counter].
Settings
[Management List]
[Paper Size/Type Counter]
bizhub C360/C280/C220
[Job Settings List] Configure paper tray settings for printing the job
settings list and specify a print side.
Register a combination of paper size and paper type for a counter. Every
time the counter is changed, the count is reset to 0.
[Counter Clear] Resets the count to 0.
[Paper Size] Select the paper size of the counter.
[Paper Type] Select the paper type of the counter.
7
7-17