Functions That Cannot Be Combined - Konica Minolta bizhub C220 User Manual

3.2 Basic copy operations
7
Press [Check Job] ö [Check Details].
% For details on [Check Job], refer to page 5-63.
8
Using the Keypad, enter a value for the number of copies you desire.
% If you have entered incorrect number of copies, press the C (clear) key on the keypad, and then re-
enter the correct number.
9
Press the Start key.
The original is scanned and copied.
% To interrupt the copy operation being performed, press the Stop key.
% A [Ready to accept another job.] message that appears during the current printing job indicates that
the next original can be scanned.

Functions that cannot be combined

Some settings cannot be combined with each other. If they are combined improperly, the settings will be giv-
en priorities in either of the two ways described below.
- The setting configured last is given priority. (The setting specified first is canceled.)
- The setting configured first is given priority. (A warning message appears.)
bizhub C360/C280/C220
3
3-8