Copy Operations Using Multiple Functions - Konica Minolta bizhub C220 User Manual

3.2 Basic copy operations
% If an original with copy guard patterns embedded is scanned, the copy operation is stopped and
the job is discarded.
% If an original with a password embedded by the password copy function is scanned, the copy op-
eration starts after you enter the password.
% If multiple originals with different passwords are scanned at the same time, you will need to enter a
password for each original.
3.2.3

Copy operations using multiple functions

This section describes copy operations using combination of functions.
1
Load the original.
2
Press [Original Setting].
% For details on [Original Setting], refer to page 5-15.
3
Press [Basic] ö [Duplex/Combine].
% For details on [Duplex/Combine], refer to page 5-8.
bizhub C360/C280/C220
3
3-6