Check Mode And Proof Copy - Kyocera Mita Vi7360 Instruction Handbook Manual

Basic Operations

Check Mode and Proof Copy

Use the Check mode to confirm copying selections before pressing the [
Check Screen allows you not only to view the current settings but to change or release
them directly from the Check mode.
In this mode, use Proof copy to produce a sample of the copied set before copying
multiple copies. This is a convenient and cost effective way of viewing the results of the
following copying selections.
• Copying conditions using Memory copy
• Sheet/Cover Insertion
• Chapter
• Combination
With Proof copy, all originals are scanned into memory, and only one set is output after
you press the [
PROOF COPY
Check Screen. After Proof copy, some copying condition keys may appear dimmed in
the Check Screen. As to the copying condition indicated on these dimmed keys, you
cannot change or release the selection.
When [ ] key is pressed, the job resumes copying until the job is completed.
START
All settings made can be viewed in the Check Screen.
Incompatible Basic Copying Condition with Proof Copy: Group
Incompatible Special Original with Proof Copy: Resolution (Very high)
Incompatible Applications with Proof Copy: None
Check Screen
PROOF COPY key
] key on the control panel or touch
• Booklet
• Image Insert
• Book Copy
• Program Job
PROOF COPY
You cannot change the selection if the
copying condition key appears dimmed.
] key. The
START
key on the
Basic Operations 6-35