Table of Contents
Advertisement
EMULATION
ITEM
Emulation Type
The machine language defines how the
computer communicates with the machine.
If you select Auto, your machine can change the
machine language automatically.
Setup
PCL
This item sets the PCL emulation configuration.
You can set the font type, symbol type, lines per
page, and font size.
•
Typeface : You can select the standard font
to be used in PCL emulation. PCL1~PCL7's
interval between letters is fixed, and
PCL8~PCL45's interval is proportional to the
font type and font size. You can adjust the
font size of PCL1~PCL7 using the Pitch
item, and PCL8~PCL45 can do using Point
Size item.
•
Symbol : This item selects the symbol set to
be used in PCL emulation. The symbol is the
group of numbers, marks, and special signs
being used when printing letters. Depending
on the Typeface setting, available symbol
sets vary.
•
Point Size : When you select one between
PCL8 and PCL45 from the Typeface menu,
you can determine the font size by setting
the height of the characters in the font.
•
Courier : This item lets you select the
version of Courier font to use.
•
Pitch : When you select one between PCL1
and PCL7 from the Typeface menu, you can
determine the font size by setting the number
of characters that will print in one horizontal
inch of type. The default value, 10 is the best
size.
•
Lines : This item allows you to set vertical
spacing from 5 to 128 lines for the default
paper size. The default number of lines may
differ according to the paper size and printing
orientation.
PostScript
This item provides you with the Print PS Error
menu item. You can select whether or not your
printer prints an error list when a PS error
occurs. Select On to print PS 3 emulation errors.
If an error occurs, the job stops processing, the
error message prints, and the printer deletes all
the jobs. If this menu is set to Off, the jobs are
deleted without an indication of the error.
DESCRIPTION
Machine status and advanced features_ 55
ITEM
Setup
Epson
This item sets the EPSON emulation
configuration.
•
Font : You can select the standard font to be
used in EPSON emulation.
•
Character Set : This item allows you to
select a character set of the desired
language.
•
Character Tab. : This item selects the
character set.
•
Pitch : You can determine the font size by
setting the number of characters that will
print in one horizontal inch of type.
•
LPI : You can set the number of lines printed
in one vertical inch.
•
Auto Wrap : This item determines whether
or not the machine automatically performs
line feed when the data overflows the
printable area of the print material.
NETWORK
ITEMS
TCP/IP
This menu allows you to manually set the TCP/IP
addresses or receive the addresses from the
network.
•
DHCP : The DHCP server allots the IP
address to you automatically.
•
BOOTP : This BOOTP server allots the IP
address to you automatically.
•
Static : You can enter IP address, subnet
mask, and gateway manually.
EtherTalk
This menu lets you select whether or not you use
the EtherTalk protocol. Select On to use the
protocol.
Ethernet Speed
This menu allows you to select the ethernet
speed.
Clear Setting
This menu performs a simple reset and restores
the factory default settings for the network
configuration. This setting will only take effect after
you have reset the printer.
Network Info
This menu allows you to print a page showing the
network parameters you set.
DESCRIPTION
DESCRIPTION
Advertisement
Table of Contents
