Windows Server 2003 - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Shared printing from a
server using Windows
NT 4.0, Windows 2000,
Windows XP, and

Windows Server 2003

Server
Printer
Note:
If you are missing
files, you may be prompted
to provide the server
operating system CD.
After connecting your printer to a Windows NT, Windows 2000,
Windows XP, or Windows Server 2003 computer (which will act as a
server), follow these steps to configure your network printer for shared
printing:
Step 1: Install a custom printer driver
1
Insert the drivers CD.
If the CD does not auto launch, click Start
type D:\Setup.exe in the Run dialog box.
2
Click Install Software.
3
Click Printer and Software.
Clients
4
Click Agree to accept the license agreement.
5
Select Suggested, and then click Next.
6
Select Local Attached, and then click Finish.
7
Select the port you are using to connect the printer to the
computer, and then click Next.
8
Click Done.
9
Print a test page to verify printer installation.
Step 2: Share the printer on the network
1
Click Start
2
Select the printer you just created.
3
Click File
4
Check the Shared check box, and then enter a name in the
Shared Name text box.
5
In the Alternate Drivers section, select the operating systems of
all the network clients that will print to the printer.
6
Click
7
Check the following to make sure the printer was successfully
shared.
Install drivers for network printing
Settings Printers.
Sharing.
.
OK
40
Run, and then