Windows Server 2003 - Lexmark T642 User Manual

Shared printing using Windows NT 4.0, Windows 2000, Windows XP, or

Windows Server 2003

After connecting the printer to a Windows NT 4.0, Windows 2000,
Windows XP, or Windows Server 2003 computer (which will act as a server),
follow these steps to configure the network printer for shared printing:
1
Install a custom printer driver.
a Launch the drivers CD.
b Click Install Printer and Software.
c Click Agree to accept the license agreement.
d Select Suggested, and click Next.
The Suggested option is the default installation for local and
network-attached setup. To install utilities, change settings, or customize device drivers, select Custom, and
follow the instructions on the screen.
e Select Local Attach, and click Finish.
Follow the instructions on the screen. It may take some time for the drivers to load.
f Close the drivers CD installer application.
g Connect the USB cable, and turn on the printer.
The Plug and Play screen appears, and a printer object is created in the Printers folder of the computer. The
printer is shared in step 2: "Share the printer on the network."
h Print a test page to verify printer installation.
2
Share the printer on the network.
a Click Start
b Select the newly added printer.
c Click File
d Select the Shared as check box, and enter a name in the text box.
e In the Alternate Drivers section, select the operating systems of all the network clients that will print to the
printer.
f Click OK.
g Check the following to make sure the printer was successfully shared.
•
•
Downloaded From ManualsPrinter.com Manuals
Installing drivers for network printing
Note: Install the printer software before connecting the USB, parallel, or serial cable.
Note: USB support is not available for Windows NT operating systems. Use a parallel cable instead. The
Plug and Play screen will not appear for Windows NT.
Settings Printers.
Sharing.
Note: If files are missing, prompts may appear to request the server operating system CD.
The printer object in the Printers folder now has a shared indicator. For example, in Windows NT 4.0, a
hand appears under the printer object.
Browse Network Neighborhood. Find the host name of the server, and look for the shared name
assigned to the printer.
Windows
20
Server
Printer
Clients