Installing A Firmware Card - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Installing a firmware card

Note:
Firmware and flash memory cards designed for
other Lexmark printers may not work with your printer.
Warning:
Firmware and flash memory cards are easily
damaged by static electricity. Touch something metal on
the printer before you touch a card.
Metal pins
Install printer memory or firmware cards
20
Follow the instructions in this section to
install an optional firmware or flash
memory card.
Only one of each type of card is
supported.
1
Unpack the card.
Avoid touching the metal pins on
the bottom of the card.
2
Holding the card by its sides, align
the pins on the card with the holes
on the system board.
3
Push the card firmly into place.
The entire length of the connector
on the flash card must touch and
be flush against the system board.
Be careful not to damage the
connectors.
4
Continue with "Reattaching the
shield and side cover" on page 21.