Printing A Menu Settings Page; Printing A Network Setup Page - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Printing a menu
settings page
Note:
For more information
about using the printer
operator panel and changing
menu settings, refer to the
publications CD.
UTILITIES MENU
1 2 3
Menu Select
5
Go Stop
Printing a network
setup page
Note:
Save the network
setup page after it prints. You
will use it in the other steps.
Print a menu settings page to review the default printer settings and to
verify that printer options are installed correctly.
1
Make sure the printer is on.
2
Press Menu until you see UTILITIES MENU, and then press
Select.
3
Press Menu until you see Print Menus, and then press Select
to print the page. The message Printing Menus appears on
the display.
4
Verify that the options you installed are correctly listed under
"Installed Features."
If an option you installed is not listed, turn the printer off, unplug
the power cord, and reinstall the option. See Step 6: "Install
printer memory or firmware cards" on page 16 for more
4
Return
information.
5
Verify the amount of memory installed is correctly listed under
"Printer Information."
6
6
Verify that the paper trays are configured for the sizes and types
of paper you loaded.
If the printer is attached to a network, print a network setup page to
verify the network connection. This page also provides important
information that helps you configure for network printing.
1
Make sure the printer is on.
2
Press Menu until you see UTILITIES MENU, and then press
Select.
3
Press Menu until you see Print Net Setup, and then press
Select to print the page.
4
Check the first section on the network setup page and confirm
that Status is "Connected."
If Status is "Not Connected," your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network support person for a solution. Afterwards, print another
network setup page to verify that you are connected to your
network.
Verify printer setup
33