Step 6: Install Printer Memory Or Firmware Cards - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Step 6: Install printer memory or
Note:
Memory options designed for other Lexmark
printers may not work with your printer.
CAUTION:
If you are installing a memory or firmware
card sometime after setting up the printer, turn the printer
off and unplug the power cord before continuing.
Note:
You need a small Phillips screwdriver to remove
the system board shield.
firmware cards
Install printer memory or firmware cards
If you do not have any memory or
firmware cards to install, skip this step
and go to Step 7: "Load paper" on
page 22.
The system board has one printer
memory connector and two firmware
card connectors.
The instructions in this section help you
install:
• Printer memory cards
•
Firmware cards
– Additional functionality
– Internet capabilities
– Flash memory
The printer can support up to 256MB of
additional printer memory and up to
32MB of flash memory.
16