Step 8: Attach Cables; Attaching A Local Cable - Lexmark 26H0122 - T 430d B/W Laser Printer Setup Manual

Step 8: Attach cables

CAUTION:
Do not connect
or disconnect a
communication port or any
other connector during a
lightning storm.
Attaching a
local cable
The printer can be attached to a network or directly to a computer to
print locally.
You can attach your printer locally using either a USB or parallel
connection.
USB and parallel ports are standard on all models.
Windows 98 SE, Windows Me, Windows 2000, and Windows XP
operating systems support USB connections. Some UNIX, Linux, and
Macintosh computers also support USB connections. Refer to your
computer operating system documentation to see if your system
supports USB.
To attach the printer to a computer:
1
Make sure the printer is turned off and unplugged.
2
Connect the printer to the computer using a USB or parallel
cable.
• A USB port requires a USB cable such as Lexmark part
number 12A2405 (2 m [6.5 ft]). Be sure to match the USB
symbol on the cable to the USB symbol on the printer.
Attach cables
29