Character - Epson L60IIP - TM B/W Direct Thermal Printer Information Manual

Bar Code Commands
The TM-L60II/L60IIP printers support the following bar code commands:
Command Name
GS h Set bar code height
GS w Set bar code width
GS k Print bar code
Select printing position of Human Readable Interpretation (HRI) characters
GS H
GS f Select font for HRI characters
GS h n
[Name] Set bar code height
[Format] ASCI
Hex
Decimal
[Range] 1 n 255
GS h n sets the height of the bar code. n specifies the number of dots in the vertical direction. One dot
corresponds to 1/180 inch. The default setting is n=162.
Program Example
PRINT #1, CHR$(&H1D);"h";CHR$(50);
PRINT #1, CHR$(&H1D);"k";CHR$(2);
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"h";CHR$(100);
PRINT #1, CHR$(&H1D);"k";CHR$(2);
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
Rev. A
GS h n
1D 68 n
29 104 n
Set height to 50
Print bar code
Set height to 100
Print bar code
TM–L60II/L60IIP Information Manual
Print Sample
Height: 50 dots
Height: 100 dots
Command Descriptions 1-49