Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 19

ESC SP n
[Name] Set right-side character spacing
[Format] ASCII
Hex
Decimal
[Range] 0 n 255
ESC SP n sets the right-side character spacing in [n
used to change the spacing between characters. The default setting is n=0. When standard mode is
selected, the horizontal motion unit set by GS P is used. When page mode is selected, the vertical or
horizontal motion unit set by GS P is used for the print direction set by ESC T.
Program Example
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);
PRINT #1, CHR$(&H1B);" ";CHR$(0);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, CHR$(&H1B);" ";CHR$(6);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1B);" ";CHR$(12);
PRINT #1, "CCCCC"; CHR$(&HA);
1-12 Command Descriptions
ESC SP n
n
1B 20
27 32 n
(vertical or horizontal motion unit)] inches. It is
Character spacing set to 0
Character spacing set to 6
Character spacing set to 12
Print Sample
AAAAA
0-inch right-side character spacing
BBBBB
6/180-inch right-side character spacing
CCCCC
12/180-inch right-side character spacing
Rev. A