Print Commands
The TM-L60II/L60IIP printers support the following commands for printing characters and
advancing paper:
Command
Name
Print and line feed
LF
CR
Print and carriage return
ESC J
Print and feed paper
ESC d
Print and feed n lines
ESC FF
Print data in page mode
FF
GS FF
Print and eject label
LF
[Name]
Print and line feed
[Format]
ASCII
Hex
Decimal
LF prints the data in the print buffer and feeds one line. The amount of paper fed per line is based on
the value set using the line spacing command. The default setting is 1/6 inch.
Program Example
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
Rev. A
Print and return to standard mode (in page mode)
Print and feed label to print starting position (on label)
LF
0A
10
TM–L60II/L60IIP Information Manual
Print Sample
AAAAA
BBBBB
Command Descriptions 1-5