Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 51

Paper sensor status (n=1, 49)
Bit Off/On Hex Decimal Status
Off 00 0
0,1
On 03 3
Off 00 0
2,3
On (0C) (12)
4 Off 00 0
5,6 — — —
7 Off 00 0
Drawer kick-out connector status (n=2, 50)
Bit Off/On Hex Decimal Status
Off 00 0
0
On 01 1
1-3 — — —
4 Off 00 0
5,6 — — —
7 Off 00 0
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII
Hex
Decimal
n
[Range] 1
DLE EOT n transmits the specified status in real time. This command is executed if the printer is off-
line, the print buffer is full, or an error occurs.
n indicates the status function as follows:
n
Function
1 Transmit printer status
2 Transmit off-line status
3 Transmit error status
4 Transmit paper roll sensor status
1-44 Command Descriptions
Paper roll near-end sensor: paper adequate.
Paper roll near-end sensor: paper near end.
Paper roll end sensor: paper present.
Paper roll end sensor: paper not present.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Drawer kick-out connector pin 3 is LOW.
Drawer kick-out connector pin 3 is HIGH.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
DLE EOT
10 04
16 4
n
n
n
Rev. A