Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 57

GS w n
[Name] Set bar code width
[Format] ASCII
Hex
Decimal
[Range] 2 n 6
GS w n sets the horizontal size of a bar code. n specifies the bar code width as shown below. The
multilevel bar codes are UPC-A, UPC-E, JAN13, JAN8, CODE93, and CODE128. The binary level bar
codes are CODE39, ITF, and CODABAR. The default setting is n=3.
Module Width (mm) for
n
Multilevel Bar Code
2 0.282
3 0.423
4 0.564
5 0.706
6 0.847
Program Example
PRINT #1, CHR$(&H1D);"w";CHR$(3);
PRINT #1, CHR$(&H1D);"k";CHR$(2);
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"w";CHR$(4);
PRINT #1, CHR$(&H1D);"k";CHR$(2);
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"w";CHR$(5);
PRINT #1, CHR$(&H1D);"k";CHR$(2);
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
1-50 Command Descriptions
GS w n
n
1D 77
29 119 n
Binary Level Bar Code
Thin Element Width (mm)
0.282
0.423
0.564
0.706
0.847
Set width size to 3
Print bar code
Set width size to 4
Print bar code
Set width size to 5
Print bar code
Thick Element Width (mm)
0.706
1.129
1.411
1.834
2.258
Print Sample
Width size 3
Width size 4
Width size 5
Rev. A