Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 94

Command Name Function
FS a 1 Load check Loads check paper
paper to print to the print starting
starting position.
position
FS a 2 Eject check Ejects the check
paper paper.
FS b Request Retransmits the
retransmission previous check
of check paper (MICR
paper character) reading
reading result results.
FS c MICR Cleans the MICR
mechanism
mechanism.
cleaning
GS ENQ Transmit real- Transmits the status
time printer of the printer upon
status receiving this
command.
GS FF
Print and Prints the data in the
eject label print buffer and
ejects the label.
GS ! Select Selects the
character size character width and
height.
GS $ Set absolute Sets the absolute
vertical print vertical print starting
position in position for
page mode characters in page
mode.
GS Define Defines a
downloaded downloaded bit
bit image image using a
specified number of
dots.
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200 TM-300/300M TM-
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
270
L60II B D A B C D
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
O O
O O
O O
O O
TM-
295