Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 5

Features
The TM-L60II (RS-232 serial interface) and TM-L60IIP (parallel interface) are line thermal
printers that can print on roll paper and thermal labels. The printers have the following features:
Light weight and ultra-compact size.
High speed printing: 12 lines per second.
Low-noise thermal printing.
High reliability due to few moving parts.
Easy maintenance for tasks such as head cleaning.
Easy paper insertion with semi-auto loading for both roll paper and labels.
Label ejection commands prevent extraneous label feeding.
Serial numbers can be printed on labels.
Command protocol based on the ESC/POS standard.
Various layouts possible using page mode.
Font selection (12 24 or 9
Character extension (up to 64 times the standard size) and character smoothing.
Four different print densities selectable via DIP switch settings.
Four-way routing of the interface, drawer control, and power cables: on either side,
underneath, or from the back of the case.
Controls on the front of the printer for easy operation, without requiring access to the sides
and back.
Water-resistant operation panel.
Bar code printing possible both in the vertical direction (fence bar code) and horizontal
direction (ladder bar code in page mode) using a command.
Repeated operation and copy printing possible using macro definitions.
Control capability for two drawers via the built-in interface.
Bidirectional parallel interface based on the IEEE 1284 Nibble/Byte Modes standard.
Thermal paper or thermal label can be selected via DIP switch settings.
ii
24) possible using a command.
Rev. A