Factory Set - Yamaha DTX500 Owner's Manual

26-3. If you want to change the Drum Kit name, press the
< >
[ ]/[ ] buttons to move the flashing cursor to the
character you want to edit, then rotate the jog dial to
select a character. A Drum Kit name can contain a
maximum of 12 characters, and these can be selected
from the following list.
space
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}≥≤
26-4. Press the [SAVE/ENTER] button again. A prompt
appears asking you to confirm the Store operation.
KIT~save~to~51
~Are~you~sure~?
26-5. Press the [SAVE/ENTER] button once more to actu-
ally execute the Store operation.
*To cancel the Store operation, press any button except
for the [SAVE/ENTER] and [SHIFT] buttons. (When
"Are you sure?" appears in the display, the jog dial will
also cancel the operation.)
When the Store operation is complete, the following
display appears.
~~~Completed!
With this operation, you have now created a
Drum Kit that has an original bass Drum
Voice.
Use the same procedure to create Drum
Voices for the other pads (input sources) and
create a complete custom Drum Kit of your
own.
7 Create Your Own Original Drum Kit

Factory Set

This operation returns all of the DTX500's internal set-
tings back to their original factory defaults.
Please proceed with caution, since executing
this operation will also rewrite the entire mem-
ory contents of the DTX500 (all Click Sets, User
Trigger Setups 8–11, User Drum Kits 51–70, User
Songs 64–83, Utility data) with the data that was
set in the unit's memory when it was shipped
from the factory.
Operation
1. First, press the [SHIFT] + [SAVE/ENTER] buttons to
call up the Utility pages.
UTIL1~Hi-hat
HHofs=~~0~T=~~5‚
2. Press the [>] button several times to call up the
UTIL8 page.
UTIL8
"~Factory~Set
3. From the page shown above, press the [SAVE/
ENTER] button to call up the prompt shown below,
asking for confirmation of the Factory Set operation.
* To cancel the Factory Set operation, press any button
except for the [SAVE/ENTER] and [SHIFT] buttons (the
jog dial can also be used to cancel the operation).
All~data~will~be
lost.AreYouSure?
4. Once again, press the [SAVE/ENTER] button to pro-
ceed with the operation.
~All~Memory
~Initializing...
DTX500 Owner's Manual
33