Factory Reset/Backup; Factory Reset-Restoring The Factory Programmed Settings - Yamaha PSR-A5000 Reference Manual

Factory Reset/Backup

Factory Reset—Restoring the Factory Programmed Settings
On page 1/2, checkmark the boxes of the desired parameters then touch [Factory Reset] to initialize the settings of the
parameters which are checkmarked. Refer to "Parameter Chart" in the Data List for details about which parameters
belong to which category below.
System
MIDI
User Effect
Registration
Favorite
Live Control
Backup/Restore—Saving and Recalling All Data and Settings as a Single File
On page 2/2, you can back up all data saved in the User drive (except expansion contents) and all settings of the
instrument to a USB flash drive as a single file named "PSR-A5000.bup."
Before calling up the display, you need to make all desired settings on the instrument.
Touching [Backup] saves the backup file to the root directory of the USB flash drive.
Touching [Restore] calls up the backup file and all data and settings are replaced.
If you want to include audio files, enter a checkmark to the "Include Audio files" beforehand.
NOTE
Before using a USB flash drive, be sure to read "Connecting USB Devices" in the Owner's Manual.
NOTE
• You can back up User data such as Voice, Song, Style, and Registration Memory by copying them individually to a USB flash drive on the File Selection display.
• If the total size of the target data for backup exceeds 3.9 GB (excluding Audio files), the backup function is not available. If this happens, back up the User data by copying
the items individually.
NOTICE
Completing the backup/restore operation may take a few minutes. Do not turn off the power during backup or restoring. If you turn off the power
during backup or restoring, data may be lost or damaged.
126
PSR-A5000 Reference Manual
Restores the System Setup parameters to the original factory settings. Refer to "Parameter Chart" in
the Data List for details about which parameters belong to the System Setup.
Restores the MIDI settings including the MIDI templates saved in the internal User memory to the
original factory settings.
Restores the User Effect settings including the following data to the original factory settings.
• User Effect types (page 99)
• User Master EQ types (page 96)
• User Master Compressor types
• User microphone/guitar settings
Turns off all the REGISTRATION MEMORY [1]–[8] lamps, indicating that no Registration Mem-
ory Bank is selected although all the Bank files are maintained. In this status, you can create Regis-
tration Memory setups from the current panel settings.
Removes all Styles or Voices from the Favorite tab
Restores all settings in the Live Control display
(page 101)
(page 92)
(page 8) on the File Selection display.
(page 111) to the original factory settings.