Yamaha DTX500 Owner's Manual page 37

TRG7 RejLvl (Specified Rejection Level)
TRG7~ ƒsnare~~0%
"RejLv1=3Frm=56‚
RejLvl [Range] 0–9
Frm [Range] 1–6, 56 (5 and 6), 7–12, 17 (1 and 7),
tm, cy, tc
This setting is used to prevent crosstalk between the input jack
assigned in the upper half of the page and the input jack assigned
in the "Frm=" setting.
After an triggering event occurs from the pad that is assigned in
the "Frm=" setting, the pad assigned in the upper half of the dis-
play will not sound for a certain length of time unless the input
level is greater than the value set here. Larger values will require
a greater input level in order to produce a trigger event.
A "Frm="56" setting assigns trigger input jacks 5 and 6.
A "Frm="17" setting assigns trigger input jacks 1 and 7.
A "Frm="tm" setting assigns trigger input jacks 2, 3, and 4.
A "Frm="cy" setting assigns trigger input jacks 5, 6, 7, and 9.
A "Frm="tc" setting assigns trigger input jacks 2, 3, 4, 5, 6, 7,
and 9.
TRG8 CopyToInput (Trigger Setup Copy)
TRG8 ~ƒsnare
"CopyToInput=~2‚
This function allows you to copy all data settings in pages [TRG2
Type (Pad Type)] through [TRG7 RejLvl (Specified Rejection
Level)] to another input jack.
NOTICE
• When the Trigger Setup Copy operation is carried out, the
Trigger Setup data will be replaced with the settings of
the copy source.
Operation
1. Hit a pad to select the copy source (input jack) from
which the data will be copied.
Rotate the jog dial and assign the copy destination (input
jack).
Copy source (input jack)
TRG8~ ƒsnare
"CopyToInput=~2‚
Copy destination (input jack)
2. Press the [SAVE/ENTER] button. A prompt appears ask-
ing confirmation of the Copy operation.
Input~Copy~to~2
~Are~you~sure~?
3. Press the [SAVE/ENTER] button to actually execute the
Copy operation.
* To cancel the Copy operation, press any button except for the
[SAVE/ENTER] and [SHIFT] buttons (the jog dial can also be
used to cancel the operation).
The following display appears after the Copy operation is
complete.
~~~Completed!
8 Trigger Setup Edit
37
DTX500 Owner's Manual