Yamaha DTX500 Owner's Manual page 32

7 Create Your Own Original Drum Kit
24
Set the Program Change and Bank Select
When a Drum Kit is selected, this function sets the MIDI Pro-
gram Change Number and the Bank Select MSB and LSB
that will be transmitted. This can be set for each MIDI chan-
nel.
By transmitting a program change message, you can have the
voice of an external MIDI device automatically change when
switching the Drum Kit on the DTX500.
˙/¶
* The indication is not shown in the upper right corner of
the display.
>
Use the [ ] button to call up the KIT24 page, then rotate the
jog dial to make the following settings.
MIDI Channel
KIT24*PC~Ch1=on
"PC003~M000L003‚
Program Change Number
Bank Select MSB
* When the Program Change Transmit On/Off is set to "
values for PC, M and L will be "
be made.
● MIDI Channel
1–16............... Target MIDI channel for the Program Change
● Program Change Transmit On/Off
on ................... Transmits.
off................. Does not transmit.
● Program Change Number
001–128 ....... Transmitted program change number.
● Bank Select MSB, LSB
000–127 ....... Bank select MSB number, LSB number
* For more information on Bank Select MSB and LSB, refer to
the Voice List and MIDI Data Format documents, etc. of the
particular external MIDI device you are using.
25
Set MIDI Volume and Pan—Control
Change
This function sets the MIDI Control Change Volume and Pan
values that will be transmitted when a Drum Kit is selected.
This can be set independently for each MIDI channel.
This lets you automatically change the voice Volume and Pan
on an external MIDI device when you switch the Drum Kit of
the DTX500.
˙/¶
* The indication is not shown in the upper right corner of
the display.
32
DTX500 Owner's Manual
Program Change
Transmit On/Off
Bank Select LSB
off
,"
---
" and the settings cannot
>
Use the [ ] button to call up the KIT25 page, then rotate the
jog dial to make the following settings.
MIDI Channel
KIT25*CC~Ch1=on
"Vol=127~Pan=~64
Volume
* When the Control Change Transmit On/Off is set to "
values for Vol and Pan will show "
not be made.
● MIDI Channel
1–16 ...............Target MIDI channel for Control Change
messages
● Control Change Transmit On/Off
on....................Transmits.
off .................Does not transmit.
● Volume
0–127 .............Sets the Volume Control Change data value
that will be transmitted.
● Pan
0–127 .............Sets the Pan Control Change data value that
will be transmitted.
26
Save the Original Voice
To save the Drum Voice you created, use the Store operation
described below and save it to the DTX500's memory. Origi-
nal kits can be saved as a Drum Kit to the User Drum Kit
(51–70) memory locations.
NOTICE
• If you select a different Drum Kit before performing the
Store operation, all changes you have made to the data
will be lost. If you want to keep settings or changes, make
sure to perform the Store operation.
26-1. Press the [SAVE/ENTER] button. The following dis-
play will appear.
KIT~save~to~51
:[Oak~Custom~~]
Edited Drum Kit name
26-2. Rotate the jog dial to select the destination user Drum
Kit number (51–70) that you want to store.
* Data cannot be stored to the Preset Drum Kits (1–50).
* You can save data to a User Drum Kit number that
already contains data. However, be careful when
doing this, since the previous data will be overwritten
with the new data.
Control Change
Transmit On/Off
Pan
off
,"
---
" and the settings can-
Store destination